Thursday, September 24, 2026

A rarely seen Blister Beetle: Eupompha wenzeli

My friend Chasity Shelton found this exciting little Meloid Beetle Eupompha wenzeli and invited me to see it for myself. It may not be rare - we saw at least a dozen without trying too hard, but all observations over decades have come from the same area (creosote flats east of the Silverbell Mountains) and the beetles seem to be out only after good rains that cause the host plant (?) Pectis papposa to sprout and bloom. Anyway, a number of my entomologist friends were pretty excited and called it a 'Good Bug'
The little Asteraceae Pectis papposa covers the ground of of the creosote flats (here our backyard) when the monsoon rains are generous, but does not pop up at all during draught years as we had them for nearly a decade now. With the distribution of the plant, the beetles may occur in our direct neighborhood, but they are so tiny and the yellow fields are pretty wide-spread, so I may have overlooked the beetles.
Many Blister Beetle species follow the patterns of their 'host' plants. I hesitate a little to use that term. Blister Beeles feed on certain plants as adults and they find each other in often grgarious assemblies to mate. Their larvae however are predatory. Different species feed on prey from grasshopper eggs to hymenoptera eggs/larvae/provisions in the nests of solitary bees. Many Blister Beetle Spp only appear very sporadically when the conditions are optimal, and I have no idea where and in which form they spend the years inbetween
Chasity took a photo of my hair going grey over the effort of photographing tiny, lifely beetles with a camera whose backscreen was completely useless in the sunshine.

Saturday, July 4, 2026

4th of July 2026

A strange day. The weather had turned from blazing hot, clear sunshine to a gloomy, overcast atmosphere. I was glad that it was cooler than expected because I had come out to old Sonoita to collect the red clay that I love to sculpt with, but it wasn't easy. First I found the site fenced off from the road with very firmly stretched barbed wire. It's a State Land fence to keep cattle off the road, so supposedly we are still allowed to get clay there, but it sure looks very reinforced right where the vein of red soil surfaces. I had to cover the sharp rocks underneath it with a towel to be able to roll under it. I thought it had been raining in that area, but the soil was like rock, and digging it was hard work. I needed to get some of this well-tested clay because I'm planning to enter a few primitive wild-clay sculptures to the jurying of a local ceramic group. I also planned to bring some to a lady in our pottery group who promised to chip in for gas. So I got my buckets filled up, and then rolled under the fence again.
As I was close to Marsh Station Rd, with an old clay mine and traditional source for brown clay that both Andy and DC at Romero House mentioned to me I decided to take a look. Of course not in this preserve, but I took pics of the colorful sign because by then there seemed to be no color left in nature - like something was sucking it up. I was really beginning to feel somewhat depressed by then so even the grafity on the old, interesting bridge seemed to provide some relieve.
The clay out there went with the theme: though it supposedly fires brown, on the ground it's a ghostly pale gray. I collected some without testing its quality by adding some water, a sign how dispirited I was by then. Maybe it's going to surprise me. Back in Tucson I found the lady's home way on the SE side - diagonally across town from my own. Her contribution indicated that she'd missed out on the latest gas price development. Oh well, gas prices are falling again I hope.
Having to cross town anyway, a short stop at the Romero House to pick up a recently fired little sculpture seemed a more cheerful idea. Except across Mainstreet an endless snake of double stocked containers snaked east on the train tracks. Then 2 engines, and still no end of the container line in sight. I'm patient, having grown up close to the Paris-Moscow line through Dortmund, Germany. But this train stopped. And stood. One after the other, the cars in front of me began to angle out of line to turn. I think I too could have tried to find my way to Stone Ave which has an underpass, but by now I did not trust my luck anymore: Romero House was always open when I visited, but probably not on this very strange 4th of July.

Thursday, June 4, 2026

Tucson Desert Musicians

My take on the 'Bremer Stadtmusikenten' of Grimm's Fairy Tales.
In the story going back to mideval Germany, four ageing domestic animals, who after a lifetime of hard work are neglected and mistreated by their former masters decide to fight back. Standing on each others backs and singing noisily, they appear at a window at night, like a huge monster, scare the humans away, and take over the cottage Since I was a child I liked this story. It applies in so many forms and is time-less - mistreated underdogs will eventually unite, rebell, and be victorious.
My seemingly more playfull version replaces the German farm animals with desert creatures - burro, coyote, bobcat and roadrunner. Of course, all of them have their own problems as human development encroaches on the desert. The burro, although brought here by humans, is considered invasive, useless and destructive. Coyote and Bobcat are still persecuted as predators and considered 'vermin' in Arizona. The Roadrunner seems quite adaptable but is losing habitat as cities grow and food sources as he stands on top of a foodchain that ranges from insects to lizards and small birds, all declining in numbers as the climate gets hotter and drier

Friday, April 24, 2026

A Mobbing

I usually walk through our front yard rather quickly when I take the dogs out in the morning, just barely registering the more flashy or noisy birds like Gila Woodpeckers, doves, quail and ravens and the occasional hawk or kestrel. Yesterday I stayed around longer to work on my firing 'pit'. I have to clean out the ashes to have good airflow the next time, and clay pieces are filling up my drying cabinet. while scratching around, I heard more birds than usual, and mostly alarm calls. Small birds kept flying in. Whole families of house finches, black-throated sparrows, verdins, noisy cactus wrens, even our Costa's Hummer congregated in a nearby Ironwood tree, more arriving by the minute. I watched at least 30 birds arrive, and that was after a while of just being aware of them subconsciously.
Well, the reason was no owl or Cooper's hawk. Our Roadrunner was basking (it was still rather cool) and then preening in a blooming ironwood tree nearby. I see him often walking along when I go, but sitting exposed like that he became a much hated target. Interestingly, no larger birds joined in. When the local screech owl gets mobbed at, woodpeckers, thrashers and even quail usually take the lead. I thought birds primarily just follow the mobbing-mood of other birds. Yesterday it seemed that only birds that where actually on the prey-list took action.

Friday, March 13, 2026

Anti-Gravity Properties of Beetle Wings?

At art fairs, people often ask me biology questions. Some even follow up later. Here is an interesting, confusing (confused?) one: 'Anyway, meeting you, a real life beetle entomologist, reminded me of the fascinating (real or imagined?) work of Russian scientist/inventor Viktor Grebennikov.  He wrote about investigating apparent anti-gravity properties of beetle wings and wing covers, and even applying them and their surface geometries to make several generations of a flying device.  Maybe it’s real, maybe it’s fantasy. Maybe he successfully passed this technology on to the Russian scientific establishment, and maybe it is the basis of alleged UFO sightings, or the advanced hypersonic weapons or the nuclear powered cruise missiles announced by Putin that can linger in the air indefinitely.  I don’t know.   But it might be interesting to try replicating some of his early experiments using beetle wings from your collection.  
As I told you, I’ve felt a weird sensation in my hand when Tucson june bugs took off, and it didn’t really feel like wing vibrations.  And my collaborator has told me about several strange observations that he has made, in tiny bugs and a spider, that seem to point towards some kind of non-gravitic force.  He has found entomologist reports of similar strange insect behaviors that they could not convincingly explain with known physics.'
I am not sure what anti-gravity means, and I have not read Grebennikov's papers. But: Close to a big mass like earth everything is exposed to its gravity. Flying or in water floating becomes possible in our atmosphere if the pressure of the air or water column under any object is considerably larger than that above it. The profile of wings moving through air can produce turbulence and pressure differences over its surfaces that produce updrift - check out diagrams of bird or airplane wings. Beetles use only their membraneous hind-wings for flight, the hard-shell front-wings are in my opinion just a protective cover (see the pre-flight image of a Lined June Bug above). I am sure that  the membranous beetle hind-wings function in a very similar way to other wings, with the heavy vein-structures in front probably producing the necessary turbulence. So I expect no miraculous change of basic laws of physics here. The heavy front-wings (elytra) seem to be mainly a protective shield for the delicate hind wings and other organs when the beetle is not flying, and beetles spend really a lot of time grounded when you compare them to many other insects. I have seen suggestions that those wings are used to facilitate flying when they are open. Maybe like a gliding apparatus? But seeing that most beetles are pretty bad fliers compared to their relatives like hymenopterans, dipterans and the 'primitive' odonata, I doubt that the stiff, heavy elytra are helping them fly. Several beetle families that fly well have greatly reduced elytra - Staphylinids and  Ripiphoridae  for example. The next photo is of Ripiphorus rex, a very bee-like beetle that appeared in another blog (https://arizonabeetlesbugsbirdsandmore.blogspot.com/2011/04/wasp-bee-fly-its-ripiphorus-vierecki.html)
Others like buprestids and some Chafers do not lift their front-wings but only push their hind-wings through lateral slits when they want to fly. Thus their body seem to keep a more airodynamic shape. They fly fast and maneuver well, land without those clumpsy crashes of their close relatives, and in addition often resemble very good fliers among Hymenopterans like wasps or bumblebees, probably a mimicry for predator avoidance. next photo: Euphoria monticola, a Flower Chafer, flying with closed front-wings
As for mysterious vibrations that you feel before a big beetle lifts off: Insects are heterotherm, not maintaining a constantly elevated bodytemperature as mammals and birds do. But their flightmusculature only functions within certain, optimal temperature range. Some big moths (Sphinx Moths), big Hymenoptera (bumblebees), and big beetles can 'shiver' to produce extra heat and also increase the pumping motion that ventilates their tracheal system. They do that as flight preparation. So no - I do not believe that beetle wings are 'anti gravity devices' Sorry to be so tied to conventional physics, living under constant gravity does that to a mind!

Thursday, October 30, 2025

Vitrification versus Maceration

A couple of weeks ago, I participated in the SW Kiln Conference in Safford AZ. It was masterfully arranged by Andy Ward on the grounds of the East AZ College at Discovery Park, complete with lectures, demos, and of course about a dozen firing ventures.
Kira loves crowds of nice people, pottery events and fire, so she got to go too
She behaved well, usually just following me around or greeting folks. But then she took off across an empty lot towards what? A log dropped by the wood collecting crew for the kilns? No, she would not enthusiastically roll on wood. Well, it turned out to be her early contribution to halloween, luckily so mummified that she didn't even pick up a stink, at least not for our human noses. She herself felt obviously great about her new perfume. Now I wanted the interesting scull of the mummy, but it was so hard and leathery that not even super sharp stone flakes from the arrow tip makers could cut through it. So I packed up the entire thing. Surprisingly, this group of people accepted my goulish idea as normal enough and contributed advice and packing material. Bill Warner suggested to soak the mummy in a strong lye of wood ash and water. From my own kiln experiments I have lots of fine ash. So at home, I made the concoction rather strong - it discouraged the coyotes that opened up my bucket during the first night but then never returned. Today I finally gathered my courage and fished a now pretty clean scull from the stinking brew. From the lye I moved it to a chlorine bath and then hydrogen peroxide. Whatever killed this animal - now it's nicely sterilized. To my naturalist friends: whose scull is it? To all others: Happy Halloween!
Solving the mystery: it's and American Badger (Taxidea taxus)

Tuesday, September 23, 2025

Mating Dance of the Desert Leaf Cutter Ant

September 20, 2025. Four and three nights ago we finally got some measurable rain. Two days ago, our Leaf-cutter Ants swarmed and danced in the early morning hours. As every time I spot this event, so probably once a year, the column of dancers rises and falls over a Thuja tree (Conifer like a cedar) in our drive way. One big old colony lives not far from it under an Ironwood. The dancers probably come together from several nests in the area. I know that I would find other dancing swarms simultaneously further down the road (this is a community with dirt roads, losely spaced houses, and mainly desert or not-at-all-landscaped yards.
These non-sting ants (Desert Leaf-cutting Ant (Acromyrmex versicolor)) live quietly in populous communities deep under ground with extensive fungus-growing chambers. Ever now and then they will venture out, cut leaves, carry them home and compost them under ground for their fungus gardens. (denuded bushes usually are not killed but rejuvenated. The larger Atta species in Central America can cause financial set backs for owners of teak plantations because the wood production is slowed down by the loss of leaves. But in a normal desert garden, the occasional raids of our small Acromyrmex are usually not more than a nuisance) When the weather is 'bad' too dry, too hot .... the ants close their entrances and stay hidden for months.
BTW, the characteristic cone shaped structures often seen are not nest entrances but heaps of sand that is expelled when new fungus chambers are built.
Of course, the entire dance party serves bringing nubile females and males together. The mature colony produces those about once every year and releases them all at once after a certain trigger, a good monsoon rain in this case. The sexes find each other up in the air, but then the 'bonded couples' or rather groups of one female with several males usually sink to the ground together .... This time I got the inpression that there were fewer females than normal .. annecdotal but possible in the current stress situation

Tuesday, May 27, 2025

PhippenMuseum Western Art Show

My Ceramic display
No body is left behind - Coati mundi family
Three Graces - Sonoran Desert Toads
A Hary Situation
Secrets Shared - Racoons
Fox Glow
Nearly full ensemble

Sunday, May 18, 2025

A Rattling Complication

Yesterday evening Chaco snake-barked and I had to relocate a small rattler from the patio. Before releasing my captures, I often take their portrait. This one was rather small, so I thougt one of my replica pots decorated with big double spirals would make the perfect complement to the coiled snake. At first, the reptile wasn't having any of it and was determined to leave in a straight line away from me and my pot.
It took a lot of convincing and stacking and restacking the unwilling star of the photoshoot before he agreed to sit, and coil up, next to one of the large black and white spirals on the Tularosa Black on White (or Cibola White Ware) Pot. But the pot was absorbing the early morning sun and the snake had had a chilly night. So eventually he snuggled up against the pot and I got some photos.
I like this one best that I took in my own cast shadow to avoid too much distraction from slanting light and body shadows of pot and snake. Also, the snake is coiled up right next to the spiral pattern which was the initial inspiration for the imprompto photo shoot
But Snek now developed ideas of his own and began to investigate the big warm object next to him. Are there ancient memories in the genes of his tribe of living next to pots like this in ruins of the Southwest and even further back of indigenous people who made pots like this?
Now he seemed very comfortable, very familiar with the set-up. He explored ...
He found the entrance, slid in and settled in. A retreat made for his size. I could just see him shuffling his coils, resting his head close to the exit.
There was no way to convince him to give up his cave. He felt safe and cozy. He gave a relaxed little buzz when I pked him with a stick. He never bothered to strike. He felt at home. Iwould have to leave my pretious pot out there in the State Trust Land until he decided to leave on his own, just hoping that nobody would find it. I could just imagine the outcome if someone did: A shriek, a dropped, broken pot, maybe a bitten finger? Eventually I ran home to get my lizard-stick, thin, with a noose made from fishing line. With it, I managed to pull him out of the pot, only to find out that it takes handling the caught critter, usually a small lizard, to open the noose and release the victim. To do this with the snake, I had to run home again and fetch a heamostat to hold the head and my little nail scissors to cut the thread. All good now, snake indignant but free, pot home with me, I maybe a little smarter?

Saturday, February 1, 2025

Size matters!

Size matters! If the pony was the size of a beetle - that would be an easy keeper! If the beetle was the size of a pony, I would saddle him and fly! (actual size of my latest mud pony and Palo Verde Root borer, no photo montage. The stuff to do when it's too cold to go 'bugging') Actually - if a homoiotherm animal like a pony was that small, it would have to live on a high caloric diet and eat constantly, more so than a hummingbird. So no easy keeper at all. And a huge, rideable beetle would suffer from oxygen deprivation even at ground level, much less high up in the air. Bummer!

Thursday, January 30, 2025

Coyote Buddies

Here in nw Tucson our coyotes are very vocal and active right now (mating season). A few days ago my heeler visited our neighbor and returned from there playing with a coyote girl that he has known for a couple of years. She was following him up our long drive way, but she has a partner now who was not happy with that. His hackles were up and he chased my heeler off. But then she ran after the dog again, so he made playful moves at her again, until her mate rebuffed him again. All the time the trio was moving towards me and my leashed Aussie who was barking angrily. Finally the male coyote had enough and drove his girl off, and my heeler joined me to go inside. Very clearly, hackles were raised but no further aggression. Pretty soon all of them, coyotes and my 3 dogs were howling, just separated by our dog run fence that the coyotes could easily scale, but they never have in 23 years and several generations of dogs. Our little adventure inspired me to make a coyote of my local wild clay

Friday, July 5, 2024

The Poison of the Sonoran Desert Toad

Incilius alvarius, Sonoran Desert Toad secrets defensive 'poison' from its parotid gland after my dog grabbed it and dropped it immediately. The dog was not harmed, he just salivated a little and seemed to have learned his lesson: better listen when M. yells 'LEAVE IT!!' You can see the greyish fluid on the gland here. BTW, my skin is in no danger, you would have to consume the stuff to feel its effect. But if you did, it might get interesting (don't!) Although known for a long time to shamans and hippies as a hallucinogen, the psychoactive effect is still the object of ongoing research. A leading Spanish researcher, Óscar Soto says "it induces a process of brain plasticity and an altered state of consciousness that is “complex and different from other psychedelics.” There may be therapeutic applications: In experiments, the main active compound 5-MeO-DMT maps in the brain and interacts with the same serotonin receptor that is used in several antidepressants. D. Wacker: ' "While there have been some studies indicating that other receptors may play a role in the actions of 5-MeO-DMT, the psychoactive effects of psychedelics in general have been primarily attributed to actions at the serotonin 5-HT2A receptor." D.Wacker

Monday, February 26, 2024

Firing Primitive Pottery

Pre-heating around a premier fire
Cow-dung fire
Fired wild-clay objects with carbon staining
Wood fire -- attempt to burn off the carbon
Sadly, even more Carbon staining Some science behind all of this. Ignore the kiln comments, they do not apply to my firing method · Jeff Zamek · · “The pot fills the gap between art and life.” Philip Rawson, Chubut, Argentina What’s happening when heating and cooling my kiln? If you make ceramic sculpture or pottery and look at a firing kiln this question must come to mind. As the temperature increase reactions are occurring and clay and glazes are changing in irreversible ways. The pottery that comes out of your kiln will be the last objects left when our sun ends its life and consumes the earth. 212 0 F. – 392 0 F. 100 0 – 200 0 C. Mechanical water is removed from the clay particle surfaces. 842 0 F. – 1112 0 F. 450 0– 600 0C. Chemical water is driven off as in the clay formula Al203 2Si02 2H20. During the mechanical and chemical water removal range if the kiln is fired too fast pots can crack or blow up often damaging adjoining pottery. 1067 0 F. – 575 0 C. Quartz in the clay goes through a sudden expansion at the same time that shrinkage occurs in the 842 0 F. to 1112 0F. - 450 0C. to 600 0C. If the kiln is fired up too fast or cooled too fast during this range pots can crack. 572 0 F. 1292 0 F. – 300 0 C. 700 0 C. Sintering, Earthenware Firing the kiln in complete oxidation will remove organic matter in the clay. Excess oxygen and time will promote a clean bisque firing. Incomplete oxidation can leave carbon in the clay resulting in bloating at higher temperatures. 1922 0 F. 2012 0 F. - 1050 0 C. -1100 0 C. Spinel (a group of minerals of the same structure and formula) develops from the metakolin changing to mullite needles. Feldspar starts to melt into a glassy phase dissolving silica from kaolin forming mullite. The clay body becomes dense and vitreous. 2192 0 F. – 1200 0 C. Vitrification? Feldspar continues melting into a glass phase decreasing porosity in the clay body. 2012 0 F. 2282 0 F. - 1100 0 C. 1250 0 C. Stone ware?. Any quartz in the clay body changes to cristobalite while other fluxes in the clay body and feldspar aids in the quartz to cristobalite conversion. On the cooling cycle cristobalite inversion occurs around 392 0 F. -200 0 C. If the kiln is opened prematurely at this range some glaze pinging can be heard. Additionally, wood fired kilns and kilns with low B.T.U. capacity frequently slow down or stall out after cone 8 (2280 0 F. – 1249 0 C.) and can develop excessive amounts of cristobalite which can cause pots cracking in typical oven ware temperatures. Kiln Insulation – Commercially made kilns are designed with the appropriate thermal gradient in terms of insulation properties. When planning any kiln building project investigate the insulation options for the type of kiln being built. Under Insulated Kilns that are under insulated can be expensive to fire due to extensive heat loss during the firing. Under insulated kilns might not reach temperature or take excessively long to achieve clay body and glaze maturing temperatures. In enclosed kiln rooms there is the potential problem of the potter’s safety due to high kiln room temperatures. There are clay body and glaze defects caused by firing kilns too fast or too slow (see other blogs). Over Insulated Conversely, kilns constructed with high levels of insulation can coast. If you have noticed at the end of a firing that pyrometric cone 9 is at the 3 o’clock position bending and the next day when opening the kiln the cone is at the 4 o’clock position the cone has been subject to “heat work” which is the result of temperature over time. When the heat source has been turned off the cones are in the maturing range longer due to the greater degree of kiln insulation. In some instances this situation can cause glazes to run or appear over fired in color and/or texture. Matte glazes can appear glossy or satin matte while glazes containing high percentages of metallic coloring oxides can run on vertical surfaces or pool in horizontal surfaces. Slower cooling rates can promote crystal growth in glazes. Porcelain clay bodies can stick to the kiln shelve or deform when subjected to prolonged times in their maturing temperature zones. This is due to their highly vitreous composition as opposed to stoneware and earthenware clays containing lower glass formation. Dense “accordion pleated” packed fiber kilns and kilns constructed of only hard bricks can be over insulated subjecting pots to excessive heat work in the cooling cycle. Hard brick kilns take a long time to heat and cool due to the density of the brick which has to be first heated to then radiate heat to the pots. Hard brick kilns take longer times to cool due to their increased thermal bank radiating heat. When to unload the kiln Under ideal conditions it is a good policy to let the kiln cool to room temperature before opening and unloading the pots. Not many of us do that! As a safe alternative a bisque kiln can be unloaded below 300 0 F. – 148 0 C. as the pots are not dense enough to be thermally shocked. However, be aware the kiln shelves, posts and pots can still be hot enough to burn you. Potters and bakers frequently have burn scars on their forearms from reaching into the kiln and ovens burning themselves on the still hot shelves. When opening a glaze kiln try to unload below 200 0 F. – 93 0 C. but if you still hear glaze pinging close the kiln and wait till the temperature drops below 100 0F. – 37 0 C. These unloading guidelines can be adjusted depending on your level of risk however, it is always best to wait when in doubt. Information sourced from, Ceramic Science for the Potter by W.G. Lawrence, Professor Lawrence taught at Alfred University

Tuesday, September 5, 2023

Pros and cons of private Insect collections

Insect collecting At the moment, huge Dynastes grantii and pretty Chrysina spp are flying in our sky islands and landing under bright lights. They are tempting many nature-lovers even from out of state, to begin an insect collection. Indeed, collecting is a great way to learn about insects, and this knowledge hopefully leads to understanding and protection of environment and habitat. A well curated collection can be a valuable teaching tool to draw in others, especially kids. But: anybody who thinks he or she needs a collection should really consider the scientific validity of that enterprise. I am not saying that the ecosystem gets damaged by the withdrawal of a few individual insects. Where you find some, there usually are many more and as imagoes (adults) their lifespan is very limited. Any individual producing offspring produces such number that any dents in the population (by collecting) are easily filled. But to feel good your about collected insects, you need to prepare them carefully, label each one with collection data (more important than species ids!), dry them properly and keep them in a protective drawer (and those will be accumulated in cabinets, then whole bug rooms!) away from carpet beetles etc. For killing and preservation, toxic chemicals are used. This is some great effort, but it should be undertaken out of respect if you are going out to kill animals. Even today It is still possible, especially out west, to find new species or contribute important data to ecological surveys. Of course, the hobbyist has to understand that the large, showy species are usually well known and new data and exciting research results are rare. With the enormous diversity of insects, not many hobbyists can become knowledgeable experts of the whole phylum. Compare species numbers to those of birds or mammals and you see what I mean. However, specialization on families within orders allows even a lay person to accumulate enough knowledge to contribute. But you have to make yourself appreciate smaller, less charismatic specimens than just the big scarabs and longhorn beetles. Detailed observation and inclusion of the small and overlooked species will make a collection relevant and important beyond just a pretty wall decoration. In due course, If the collection is well cared for and scientifically interesting material is accumulated, it should later be made available to research and teaching in a museum or university setting. Collecting used to be the only way to really learn about insects, because reliable identifications in the field are difficult. Optical instruments and dissections may be needed, and good field guides are hardly available when compared to what’s out there for birders. To a certain degree, this situation is changing. With easy access to good macro-photographic equipment (even I phones!) much can be recorded and identified without the actual specimen in hand. Internet platforms like BugGuide and INaturalis and even our SW Arthropods group on Face Book (I am NOT suggesting to ‘just google it’) connect the naturalist to experts who are willing to help with their knowledge and who in turn gain access to data from the crowd of observers. Of course whenever something interesting is shown on those platforms, the experts will clamor for specimens, not just photos (with good reason). But still the beginner should probably use photography and internet platforms to learn the basics before he or she starts collecting and gets stuck with a pretty, showy, but in the end not very interesting collection of just Hercules Beetles, Silk Moths and pretty butterflies. That way, the collection may eventually become much more satisfying than just a wall decoration.

Saturday, July 15, 2023

Gila Woodpeckers in Saguaro Boots

On the 7th of May, a friend visited with her family to look for nests in Saguaros. Tucson Audubon had offered some kind of sponsorship reward for finding those. So we looked at Raptor nests, a White-winged Dove, House Sparrows. The dad of the family heard fine chirps from above: deep inside the stem of a saguaro a clutch of Gila Woodpeckers had just hatched. Gila Woodpeckers and Gilded Flickers hammer holes deep into the stem or a big arm of our giant cacti. This nesting cavity is not used in the year when it's built. But soon the cactus encloses the cavity with heavy sclerotized layer of scar tissue. So now there is this hard, inverted bag hanging inside the cactus, reaching in, then curving down, as big as a boot. It is surrounded by the moist, water-storing tissue of the cactus and parts of the wooden saguaro skeleton. It's impenetrable to most predators. Most importantly, it's isolated from temperature fluctuations by the huge amount of water-holding material around it. Desert nights can be cold, daytime temperatures are extremely hot. Eldon Braun of the UoA found in his master-thesis research that the daily fluctuations inside of several Gila Woodpecker nests never exceeded 14C, even if the nights hovered around 10C and the daytime high was way over 40C (scientists use Celsius measurements). Great conditions for the woodpecker brood to grow up in. At the same time young dove chicks in their flimsy nests nearby experienced the full impact of heat and cold. Surprisingly, most dove nests produce fledglings anyway. But not surprisingly, the baby doves develop very quickly (high protein crop milk helps) and then they are out of the nest. Precocious quail chicks run from their ground nests even faster - on the day of hatching! However, the Gila Woodpeckers that we heard chirping faintly on the 7th of May are still in their 'Saguaro boot' today on the 15th of July! Now their chirping is not faint anymore, but loud and demanding! They are probably close to fledging, but still holding out. Who would be eager to leave the climatized safety of the inside of a huge cactus column for the punishing heat that the outside desert is experiencing right now? But when they do decide to fledge, monsoon rains will hopefully be right around the corner to cause scores of insects to emerge that the young woodpeckers will devour. Still, the juveniles also learn very quickly to get refreshments from our hummingbird feeders. Soon!